To install your SSL certificate, you will need to do the following:
Step 1: Install the Intermediate Certificate
2
From the Admin screen on your web server select Security, Certificates, Intermediate CA Certificate. The screen shows you a list of any intermediate certificates you currently have installed, as well as allowing you to install a new intermediate certificate.
3
Select Browse and search for the intermediate certificate you have saved on your server, click OK, then Install.
Step 2: Install the SSL Certificate
1
Copy and paste your SSL certificate from the email and save it locally as a .crt file e.g. ssl_cert.crt.
2
From the Admin screen on your web server, select Security, Certificates.
3
Select Browse and search for your SSL certificate you have just saved.
4
When you locate your SSL certificate click OK.
5
Finally select the Install button; this will install the certificate on to your web server.
Step 3: Selecting Connections for SSL
You can select which connections you would like to use an SSL connection for. This is done via the SSL screen in the Security menu:
1
Select Security, then SSL.
2
Select which connections you would like to use SSL for using the check boxes, when you have made your selections click Apply.
Step 4: Selecting certificate interface
You can also select which interface you would like to use your SSL certificate for. If left blank, the certificate will operate on the primary system interface.
1
From the Admin screen select Security, Certificates, Interfaces.
2
Enter the Interface you would like to use the SSL certificate on, this can be a fully-qualified domain name (FQDN) or an IP address.
3
Once you have entered the FQDN or IP address, click Set.