123 Reg Support

Solving 0x800 errors

Top

Error 0x800420cb - message could not be opened

You may get the following error message: Message Could Not Be Opened From Outbox Folder, Account: pop.123-reg.co.uk.co.uk. MailAccount',Server:'smtp.myisp.co.uk', Protocol:SMTP,Port:25,Secure(SSL):No, Error Number:0x800420CB

Solution

The usual cause of this problem is a corrupted Outbox.dbx file. To fix it:
  • Click Tools
  • Select Accounts
  • Click the Mail tab
  • Choose a duplicate mail account, and then click Remove. Keep doing this until all duplicated accounts have been removed.
  • Click Close
Still having problems with this error message? Try renaming the Outbox.dbx file. Please note that this will permanently delete any messages still in the outbox.
  • Close Outlook Express
  • Right-click the Start button on your desktop
  • Click Find or Search
  • Search for the Outbox.dbx file
  • Right-click the file, click Delete, then click Yes
  • Start Outlook Express, then try again.
Top

Error 0x800CCC0B

If you are receiving the error message illustrated below in Outlook, please view the following link for a solution. http://support.microsoft.com/kb/827349 "An unknown error has occurred. Subject 'Review', Account: 'pop.123-reg.co.uk (1)', Server: 'pop.123-reg.co.uk', Protocol: SMTP, Port: 25, Secure(SSL): No, Error Number: 0x800CCC0B"
Top

Error 0x800ccc7d (server does not support SSL)

You may get the error message 'The server does not support a SSL connection. Account; pophost.123-reg.co.uk.co.uk Server smtp.123-reg.co.uk.' Protocol SMTP, server response '250 HELP' Port; 25, Secure (SSL) Yes, Server Error 250, error number 0x800CCC7D.'

Solution

This problem occurs because your version of Outlook Express is set up to use Secure Socket Layer (SSL), which 123-reg.co.uk does not use. To fix this problem, open Outlook Express, and click:
  • Tools
  • Accounts
  • Then enter on your 123-reg.co.uk mail account and click Properties
  • Lastly, click Advanced
  • On the next screen, remove the checks from the boxes. This server requires a secure connection for both Outgoing mail (SMTP) and Incoming mail (POP3).
Top

Error 0x800ccc90 (POP3 response error - client response invalid)

This error reads as follows: There was a problem logging onto your mail server. Your password was rejected. Account: 'pophost.123-reg.co.uk', Server: 'pophost.123-reg.co.uk', Protocol: POP3, Server Response: '-ERR invalid user or password', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92

Solution

The first step is to check your Outlook Express settings, making sure that the POP3 and SMTP servers are correct, and that your full username and password are correct. Then test your connection by following this procedure:
  • Click the Start button, then click Run, and type in cmd (Windows NT/2000/XP) or Command (Windows 95/98/ME). This will open a new command prompt window, with white text on a black screen.
  • Type in the following exactly as it appears. You will not see what you are entering so take it slowly, and if you make a mistake, start again:
  • telnet pop.123-reg.co.uk 110
  • Click the Enter key on your keyboard. You will then be connected to the email server.
  • Type in USER followed by your email address, e.g. USER jo_blog@domain.co.uk, and then click the Enter key. You will then get a message +OK.
  • Type in PASS followed by your password, e.g. PASS joblog0370-1, then click the Enter key. If it is correct, you will get an OK Well Done message.
  • If you can do this, you have connected to the 123-reg.co.uk server, meaning the problem is with Outlook Express.
If you cannot connect to the server, your password may have become corrupted. Please change it, then try again. If this doesn't work, it may be that TCP/IP has become corrupted within Windows. Try reinstalling TCP/IP using the following instructions:
  • Click Start
  • Go into Settings
  • Then Control Panel
  • Then Network Connections
  • Right-click your connection, and click Properties
  • Click Internet Protocol (TCP/IP), then click Uninstall
Close down your PC and start it up again
  • Follow the same steps as above, but instead of clicking Uninstall click Install
  • On the screen which appears, click Protocol and then Add
  • Click Internet Protocol (TCP/IP) and then OK (you may be asked for your Windows installation disk at this point)
If you run Windows XP, the process is slightly different:
  • Click Start
  • Go to Run
  • Type in Command
  • In the screen which appears, type in netsh int ip reset c:resetlog.txt
If you still encounter problems, Outlook Express itself may be corrupt. Please follow Microsoft's instructions on how to delete it and reinstall it, along with making a backup of your address book(s).
Top

Error 0x800ccc92 (POP3 password invalid)

There was a problem logging onto your mail server. Your password was rejected.'pophost.123-reg.co.uk.', Server: 'pophost.123-reg.co.uk.', Protocol: POP3, Server Response: '-ERR invalid user or password', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92

Solution

Check your email client settings, making sure that the POP3 and SMTP servers are correct, and that your full username and password are correct. If you are still having problems, your password may have become corrupted. Try changing it.
Top

Errors 0x800ccc0d and 0x800ccc0e

Errors 0x800ccc0d and 0x800ccc0e ("Can't Find Host - Cannot Locate Server" and "Failed To Connect - Cannot Connect To Server") You may receive one of the following error messages: The connection to the server has failed. Account: 'pophost.123-reg.co.uk', Server: 'pophost.123-reg.co.uk', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E The host 'pophost.123-reg.co.uk' could not be found. Please verify that you have entered server name correctly. Account:'yourname', Server 'pophost.123-reg.co.uk; protocol: POP3, Port:110'Secure(SSL):No, Socket Error:11001,Error Number 0x800CCC0D.

Solution

If you have not changed anything since the last time you checked or sent mail, do not adjust your settings. Simply close Outlook Express, reopen it and try again later.   Then test your connection by following this procedure:
  • Click the Start button, then go to Run, and type in cmd (Windows NT/2000/XP) or Command (Windows 95/98/ME). This will open a new command prompt window, with white text on a black screen.
  • Type in the following exactly as it appears. You will not see what you are entering so take it slowly, and if you make a mistake, start again:
  • telnet pop.123-reg.co.uk 110
  • Click the Enter key on your keyboard. You will then be connected to the email server.
  • Type in USER followed by your email address, e.g. USER your.name@yourdomain.co.uk, and then click the Enter key. You will then get a message +OK.
  • Type in PASS followed by your password, e.g. PASS password, and click the Enter key. If it is correct, you will get an OK Well Done message. If you can do this, you have connected to the 123-reg.co.uk server and so the problem is with Outlook Express.
If you cannot connect to the server, your password may be corrupted. Please change it and try again.